MAMBA GTX Ball Bearing Turbocharger GT3582R For FORD FALCON XR6 BA BF w/ 38mm WG MAMBA GTX Ball Bearing Turbocharger GT3582R For FORD FALCON XR6 BA BF w/ 38mm WG Mamba Product  Information P/N.  002-0077 Item Name MAMBA FORD FALCON BA BF XR6 GTX Billet Ball Bearing Turbocharger GT3582R with 4” .70 Anti Surge Compressor Housing and 1.05 T3 5 Bolt Housing Situation Brand New In BoxComplete CHRA balanced by SCHENCK MBRS110 Germany Application Support 500 ~ 650 HP Wheel Spec Comp. Wheel : 61.4 / 82 mm / Trim 56 (GTX 11+0 Blade Billet Wheel w/ Extended Tip)Turbine Wheel : 62 mm / 68 mm / Trim 84 (GT35R) Comp. Housing Compressor Housing Inlet OD: 4” / 100mmCompressor Housing Outlet OD: 2.5” / 63.5 mmCompressor Housing A/R: .70 Turbine Housing Turbine Housing A/R : 1.05Turbine Inlet Flange: T3Turbine Outlet: STD 5 Bolt for XR6. (Fit factory XR6 Dump pipe)WG hole: 34mm flapper Dia: 38mm Actuator 0.8bar spring will be pre-installed on the adjustable actuatorAdditional 1.2bar and 1.5bar spring will go with box Bearing / Cooling Ceramic Ball BearingOil and Water-cooled system Kit Includes Everything shown on picture is included. Warranty  One year Made By  MAMBATEK IMPORTANT NOTES FOR BUYERS:*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS

MAMBA GTX Ball Bearing Turbocharger GT3582R For FORD FALCON XR6 BA BF w/ 38mm WG

Code: 002-0077
$1,703.90
In Stock

Product  Information

P/N.

 002-0077

Item Name

MAMBA FORD FALCON BA BF XR6 GTX Billet Ball Bearing Turbocharger GT3582R with 4” .70 Anti Surge Compressor Housing and 1.05 T3 5 Bolt Housing

Situation

Brand New In Box
Complete CHRA balanced by SCHENCK MBRS110 Germany

Application

Support 500 ~ 650 HP

Wheel Spec

Comp. Wheel : 61.4 / 82 mm / Trim 56 (GTX 11+0 Blade Billet Wheel w/ Extended Tip)
Turbine Wheel : 62 mm / 68 mm / Trim 84 (GT35R)

Comp. Housing

Compressor Housing Inlet OD: 4” / 100mm
Compressor Housing Outlet OD: 2.5” / 63.5 mm
Compressor Housing A/R: .70

Turbine Housing

Turbine Housing A/R : 1.05
Turbine Inlet Flange: T3
Turbine Outlet: STD 5 Bolt for XR6. (Fit factory XR6 Dump pipe)
WG hole: 34mm flapper Dia: 38mm

Actuator

0.8bar spring will be pre-installed on the adjustable actuator
Additional 1.2bar and 1.5bar spring will go with box

Bearing / Cooling

Ceramic Ball Bearing
Oil and Water-cooled system

Kit Includes

Everything shown on picture is included.

Warranty

 One year

Made By

 MAMBATEK


IMPORTANT NOTES FOR BUYERS:

*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND

*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME

*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS

*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS

Product  Information

P/N.

 002-0077

Item Name

MAMBA FORD FALCON BA BF XR6 GTX Billet Ball Bearing Turbocharger GT3582R with 4” .70 Anti Surge Compressor Housing and 1.05 T3 5 Bolt Housing

Situation

Brand New In Box
Complete CHRA balanced by SCHENCK MBRS110 Germany

Application

Support 500 ~ 650 HP

Wheel Spec

Comp. Wheel : 61.4 / 82 mm / Trim 56 (GTX 11+0 Blade Billet Wheel w/ Extended Tip)
Turbine Wheel : 62 mm / 68 mm / Trim 84 (GT35R)

Comp. Housing

Compressor Housing Inlet OD: 4” / 100mm
Compressor Housing Outlet OD: 2.5” / 63.5 mm
Compressor Housing A/R: .70

Turbine Housing

Turbine Housing A/R : 1.05
Turbine Inlet Flange: T3
Turbine Outlet: STD 5 Bolt for XR6. (Fit factory XR6 Dump pipe)
WG hole: 34mm flapper Dia: 38mm

Actuator

0.8bar spring will be pre-installed on the adjustable actuator
Additional 1.2bar and 1.5bar spring will go with box

Bearing / Cooling

Ceramic Ball Bearing
Oil and Water-cooled system

Kit Includes

Everything shown on picture is included.

Warranty

 One year

Made By

 MAMBATEK


IMPORTANT NOTES FOR BUYERS:
*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS