MAMBA GTX Ball Bearing Turbocharger 2.36" A/R .42 GT2860RS w/ + .64 T25 Int' Hsg MAMBA GTX Ball Bearing Turbocharger 2.36" A/R .42 GT2860RS w/ + .64 T25 Int' Hsg Mamba Product Information P/N. 002-0124 Item Name Universal MAMBA GT2860RS Ball Bearing Turbocharger with .42 Cover & .64 T25 Internal Gate Turbine Housing Situation Brand New In Box Spec Comp. Wheel : 47.1 mm / 60.13 mm / Trim 62?(11+0 GTX Billet Wheel w/ Extend Tip) Turbine Wheel : 47.0 mm / 53.8 mm / Trim 76 Compressor Housing Inlet OD : 59.9 mm / 2.36" Compressor Housing Outlet OD : 2” / 50.8 mm Compressor Housing A/R : .42 Turbine Housing A/R : .64 Turbine Inlet Flange : 25 Turbine Outlet Flange : 5 Bolt Application 1.5~2.5L Gasoline engine / 3~4L Diesel Engine Support 250~350 HP Bearing system NTN Ceramic Dual Ball Bearing Cooling System Oil and Water-Cooled Actuator 0.8bar spring is pre-installed on actuator. 1.2bar and 1.5bar spring will go with box that user can change it easily.  Can Kit Includes 1 x 70cm Oil Feed Line Kit with 1.0mm Restrictor 2 x Water Feed / Return Line Kit 1 x Turbo Oil Return Pipe Kit 1 x Turbine Inlet Gasket 1 x Turbine outlet Gasket 5 x Stud Kit with copper-coated nut 3 x Adjustable Actuator Springs 1 x CHRA Balance Sheet Everything shown on picture is included Made By MAMBATEK Warranty One year IMPORTANT NOTES FOR BUYERS:*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS

MAMBA GTX Ball Bearing Turbocharger 2.36" A/R .42 GT2860RS w/ + .64 T25 Int' Hsg

Code: 002-0124
$1,406.90
In Stock

Product Information

P/N.

002-0124

Item Name

Universal MAMBA GT2860RS Ball Bearing Turbocharger with .42 Cover & .64 T25 Internal Gate Turbine Housing

Situation

Brand New In Box

Spec

Comp. Wheel : 47.1 mm / 60.13 mm / Trim 62?(11+0 GTX Billet Wheel w/ Extend Tip)

Turbine Wheel : 47.0 mm / 53.8 mm / Trim 76

Compressor Housing Inlet OD : 59.9 mm / 2.36"

Compressor Housing Outlet OD : 2” / 50.8 mm

Compressor Housing A/R : .42

Turbine Housing A/R : .64

Turbine Inlet Flange : 25

Turbine Outlet Flange : 5 Bolt

Application

1.5~2.5L Gasoline engine / 3~4L Diesel Engine

Support 250~350 HP

Bearing system

NTN Ceramic Dual Ball Bearing

Cooling System

Oil and Water-Cooled

Actuator

0.8bar spring is pre-installed on actuator.

1.2bar and 1.5bar spring will go with box that user can change it easily.

 Can Kit Includes

1 x 70cm Oil Feed Line Kit with 1.0mm Restrictor

2 x Water Feed / Return Line Kit

1 x Turbo Oil Return Pipe Kit

1 x Turbine Inlet Gasket

1 x Turbine outlet Gasket

5 x Stud Kit with copper-coated nut

3 x Adjustable Actuator Springs

1 x CHRA Balance Sheet

Everything shown on picture is included

Made By

MAMBATEK

Warranty

One year


IMPORTANT NOTES FOR BUYERS:

*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND

*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME

*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS

*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS

Product Information

P/N.

002-0124

Item Name

Universal MAMBA GT2860RS Ball Bearing Turbocharger with .42 Cover & .64 T25 Internal Gate Turbine Housing

Situation

Brand New In Box

Spec

Comp. Wheel : 47.1 mm / 60.13 mm / Trim 62?(11+0 GTX Billet Wheel w/ Extend Tip)

Turbine Wheel : 47.0 mm / 53.8 mm / Trim 76

Compressor Housing Inlet OD : 59.9 mm / 2.36"

Compressor Housing Outlet OD : 2” / 50.8 mm

Compressor Housing A/R : .42

Turbine Housing A/R : .64

Turbine Inlet Flange : 25

Turbine Outlet Flange : 5 Bolt

Application

1.5~2.5L Gasoline engine / 3~4L Diesel Engine

Support 250~350 HP

Bearing system

NTN Ceramic Dual Ball Bearing

Cooling System

Oil and Water-Cooled

Actuator

0.8bar spring is pre-installed on actuator.

1.2bar and 1.5bar spring will go with box that user can change it easily.

 Can Kit Includes

1 x 70cm Oil Feed Line Kit with 1.0mm Restrictor

2 x Water Feed / Return Line Kit

1 x Turbo Oil Return Pipe Kit

1 x Turbine Inlet Gasket

1 x Turbine outlet Gasket

5 x Stud Kit with copper-coated nut

3 x Adjustable Actuator Springs

1 x CHRA Balance Sheet

Everything shown on picture is included

Made By

MAMBATEK

Warranty

One year


IMPORTANT NOTES FOR BUYERS:
*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS