MAMBA GTX Ball Bearing Turbo 3" Twisted AS GT2860RS w/ .64 T3 Int Gate Hsg MAMBA GTX Ball Bearing Turbo 3" Twisted AS GT2860RS w/ .64 T3 Int Gate Hsg Mamba Product Information P/N. 002-0050 Item Name MAMBA GTX Billet Ball Bearing Turbocharger 3” Anti Surge GT2860RS with A/R .64 T3 6-Bolt Turbine Housing Situation Brand New In Box Spec Comp. Wheel : 47.2 mm / 60.0 mm / Trim 62?(11+0 GTX Billet Wheel w/ Extend Tip) Turbine Wheel: 47.0 mm / 53.8 mm / Trim 76 Compressor Housing Inlet OD: 3” / 75.6mm Compressor Housing Outlet OD: 2” / 51.3 mm Compressor Housing A/R: .60 Turbine Housing A/R : .64 Turbine Inlet Flange: T3 Turbine Outlet:6 Bolt (TD42 Type) Actuator 0.8bar spring pre-installed. 1.2bar and 1.65bar spring will go with box. Application 1.8~2.5L Engine 280 ~ 350 HP Bearing system Dual Ceramic Ball Bearing Cooling System Oil and Water-Cooled Kit Includes 1 x 70cm Oil Feed Line Kit with 1mm Restrictor and 1/8 BSPT Tee 2 x 25cm Water Feed / Return Line Kit 1 x Turbo Oil Return Pipe Kit 1 x T3 Turbine Inlet Gasket 1 x 6 Bolt Turbine Outlet Gasket 6 x 8mm Stud Kit with copper-coated nut 1 x 6-bolt dump pipe flange Everything shown on picture is included Made By MAMBATEK Warranty One year IMPORTANT NOTES FOR BUYERS:*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS

MAMBA GTX Ball Bearing Turbo 3" Twisted AS GT2860RS w/ .64 T3 Int Gate Hsg

Code: 002-0050
$1,406.90
In Stock

Product Information

P/N.

002-0050

Item Name

MAMBA GTX Billet Ball Bearing Turbocharger 3” Anti Surge GT2860RS with A/R .64 T3 6-Bolt

Turbine Housing

Situation

Brand New In Box

Spec

Comp. Wheel : 47.2 mm / 60.0 mm / Trim 62?(11+0 GTX Billet Wheel w/ Extend Tip)


Turbine Wheel: 47.0 mm / 53.8 mm / Trim 76


Compressor Housing Inlet OD: 3” / 75.6mm


Compressor Housing Outlet OD: 2” / 51.3 mm


Compressor Housing A/R: .60


Turbine Housing A/R : .64


Turbine Inlet Flange: T3


Turbine Outlet:6 Bolt (TD42 Type)

Actuator

0.8bar spring pre-installed.

1.2bar and 1.65bar spring will go with box.

Application

1.8~2.5L Engine

280 ~ 350 HP

Bearing system

Dual Ceramic Ball Bearing

Cooling System

Oil and Water-Cooled

Kit Includes


1 x 70cm Oil Feed Line Kit with 1mm Restrictor and 1/8 BSPT Tee


2 x 25cm Water Feed / Return Line Kit


1 x Turbo Oil Return Pipe Kit


1 x T3 Turbine Inlet Gasket


1 x 6 Bolt Turbine Outlet Gasket


6 x 8mm Stud Kit with copper-coated nut


1 x 6-bolt dump pipe flange


Everything shown on picture is included


Made By

MAMBATEK

Warranty

One year


IMPORTANT NOTES FOR BUYERS:

*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND

*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME

*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS

*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS

Product Information

P/N.

002-0050

Item Name

MAMBA GTX Billet Ball Bearing Turbocharger 3” Anti Surge GT2860RS with A/R .64 T3 6-Bolt

Turbine Housing

Situation

Brand New In Box

Spec

Comp. Wheel : 47.2 mm / 60.0 mm / Trim 62?(11+0 GTX Billet Wheel w/ Extend Tip)


Turbine Wheel: 47.0 mm / 53.8 mm / Trim 76


Compressor Housing Inlet OD: 3” / 75.6mm


Compressor Housing Outlet OD: 2” / 51.3 mm


Compressor Housing A/R: .60


Turbine Housing A/R : .64


Turbine Inlet Flange: T3


Turbine Outlet:6 Bolt (TD42 Type)

Actuator

0.8bar spring pre-installed.

1.2bar and 1.65bar spring will go with box.

Application

1.8~2.5L Engine

280 ~ 350 HP

Bearing system

Dual Ceramic Ball Bearing

Cooling System

Oil and Water-Cooled

Kit Includes


1 x 70cm Oil Feed Line Kit with 1mm Restrictor and 1/8 BSPT Tee


2 x 25cm Water Feed / Return Line Kit


1 x Turbo Oil Return Pipe Kit


1 x T3 Turbine Inlet Gasket


1 x 6 Bolt Turbine Outlet Gasket


6 x 8mm Stud Kit with copper-coated nut


1 x 6-bolt dump pipe flange


Everything shown on picture is included


Made By

MAMBATEK

Warranty

One year


IMPORTANT NOTES FOR BUYERS:
*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS