MAMBA 9-6 Billet Turbo FIT TOYOTA 3S-GTE Celica ST165 MR2 3" TD05H-16G 7cm MAMBA 9-6 Billet Turbo FIT TOYOTA 3S-GTE Celica ST165 MR2 3" TD05H-16G 7cm Mamba Product Information P/N.  001-1116 Item Name MAMBA 9-6 Billet Turbocharger TOYOTA Celica 3S-GTE GT-FOUR 3" A/R .60 TD05H-16G with 7cm Bolt-on Housing Situation  Brand New In Box Complete CHRA balanced by SCHENCK MBRS110 Germany Application 1986~1989 TOYOTA 3S-GTE ST165 Celica Bolt Up to fit factory exhaust manifold and dump pipe. Cover inlet pipe / Air filter needs to modify to fit this 3” inlet. This MAMBA Special turbo goes with 7cm turbine housing will make it spool faster than factory 8cm CT26 Turbo. And larger billet wheel will supply enough airflow to support higher torque and top end HP at the same time. Wheel Spec Compressor Wheel : 48.3 / 68mm (6+6 Blade 16G Billet Wheel w/ Extended Tip) Turbine Wheel : 49.2 / 56 mm (9 Blade TD05H Turbine Wheel) Turbine Housing Compressor Housing : 3” inlet / 2” outlet / A/R .60 Turbine Housing : 7cm (A/R .49) Actuator  0.8bar spring is pre-installed on the adjustable actuator Additional 1.2bar and 1.5bar spring go with box. Bearing system  Journal Bearing Performance Thrust Bearing Kit Included. Cooling System  Oil and Water-cooled system Kit Includes 1 x Oil Feed Line Kit 1 x Oil Return Pipe Kit 2 x Water Line Kit 1 x Turbine Inlet Gasket 1 x Turbine Outlet Gasket   Everything shown on picture included Made By  MAMBATEK Warranty  One year IMPORTANT NOTES FOR BUYERS:*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS

MAMBA 9-6 Billet Turbo FIT TOYOTA 3S-GTE Celica ST165 MR2 3" TD05H-16G 7cm

Code: 001-1116
$1,317.69
In Stock

Product Information

P/N.

 001-1116

Item Name

MAMBA 9-6 Billet Turbocharger TOYOTA Celica 3S-GTE GT-FOUR 3" A/R .60 TD05H-16G with 7cm Bolt-on Housing

Situation

 Brand New In Box
 Complete CHRA balanced by SCHENCK MBRS110 Germany

Application

1986~1989 TOYOTA 3S-GTE ST165 Celica

Bolt Up to fit factory exhaust manifold and dump pipe.

Cover inlet pipe / Air filter needs to modify to fit this 3” inlet.

This MAMBA Special turbo goes with 7cm turbine housing will make it spool faster than factory 8cm CT26 Turbo. And larger billet wheel will supply enough airflow to support higher torque and top end HP at the same time.

Wheel Spec

Compressor Wheel : 48.3 / 68mm (6+6 Blade 16G Billet Wheel w/ Extended Tip)

Turbine Wheel : 49.2 / 56 mm (9 Blade TD05H Turbine Wheel)

Turbine Housing

Compressor Housing : 3” inlet / 2” outlet / A/R .60

Turbine Housing : 7cm (A/R .49)

Actuator

 0.8bar spring is pre-installed on the adjustable actuator
 Additional 1.2bar and 1.5bar spring go with box.

Bearing system

 Journal Bearing
 Performance Thrust Bearing Kit Included.

Cooling System

 Oil and Water-cooled system

Kit Includes

1 x Oil Feed Line Kit

1 x Oil Return Pipe Kit

2 x Water Line Kit

1 x Turbine Inlet Gasket

1 x Turbine Outlet Gasket

 

Everything shown on picture included

Made By

 MAMBATEK

Warranty

 One year


IMPORTANT NOTES FOR BUYERS:

*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND

*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME

*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS

*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS

Product Information

P/N.

 001-1116

Item Name

MAMBA 9-6 Billet Turbocharger TOYOTA Celica 3S-GTE GT-FOUR 3" A/R .60 TD05H-16G with 7cm Bolt-on Housing

Situation

 Brand New In Box
 Complete CHRA balanced by SCHENCK MBRS110 Germany

Application

1986~1989 TOYOTA 3S-GTE ST165 Celica

Bolt Up to fit factory exhaust manifold and dump pipe.

Cover inlet pipe / Air filter needs to modify to fit this 3” inlet.

This MAMBA Special turbo goes with 7cm turbine housing will make it spool faster than factory 8cm CT26 Turbo. And larger billet wheel will supply enough airflow to support higher torque and top end HP at the same time.

Wheel Spec

Compressor Wheel : 48.3 / 68mm (6+6 Blade 16G Billet Wheel w/ Extended Tip)

Turbine Wheel : 49.2 / 56 mm (9 Blade TD05H Turbine Wheel)

Turbine Housing

Compressor Housing : 3” inlet / 2” outlet / A/R .60

Turbine Housing : 7cm (A/R .49)

Actuator

 0.8bar spring is pre-installed on the adjustable actuator
 Additional 1.2bar and 1.5bar spring go with box.

Bearing system

 Journal Bearing
 Performance Thrust Bearing Kit Included.

Cooling System

 Oil and Water-cooled system

Kit Includes

1 x Oil Feed Line Kit

1 x Oil Return Pipe Kit

2 x Water Line Kit

1 x Turbine Inlet Gasket

1 x Turbine Outlet Gasket

 

Everything shown on picture included

Made By

 MAMBATEK

Warranty

 One year


IMPORTANT NOTES FOR BUYERS:
*PLEASE CONTACT US FOR STOCK AVAILABILITY CHECK ETC. BEFORE PLACING AN ORDER. A 10% HANDLING FEE WILL BE CHARGED FOR "AFTERPAY" PAYMENT REFUND IF WE ARE NOT CONTACTED BEFOREHAND
*SOME PRODUCTS MAY BE SHIPPED FROM OVERSEAS IF OUT OF STOCK. HANDLING TIME IN THIS CIRCUMSTANCE WILL BE 5-10 DAYS PLUS SHIPPING TIME
*SOME PART NUMBERS ARE MADE TO ORDER. HANDLING TIME WILL BE 2-3 WEEKS
*EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA + REMOTE AREAS