MAMBA 12-11 GTX BilletTurbo FIT TOYOTA 7MGTE Supra Soarer 3" TD05H-20G w/7cm Hsg MAMBA 12-11 GTX BilletTurbo FIT TOYOTA 7MGTE Supra Soarer 3" TD05H-20G w/7cm Hsg Mamba Product Information P/N.  001-1315 Item Name MAMBA 12-11 GTX Billet Turbocharger TOYOTA 7M-GTE 3" Anti Surge TD05H-20G with 7cm Turbine Housing Situation  Brand New In Box Complete CHRA balanced by SCHENCK MBRS110 Germany Application TOYOTA 7M-GTE Bolt Up to fit factory exhaust manifold and dump pipe. Cover inlet pipe / Air filter needs to modify to fit this 3" inlet.   This MAMBA Special turbo goes with 7cm turbine housing will make it spool faster than factory 8cm CT26 Turbo. And larger billet wheel will supply enough airflow to support higher torque and top end HP at the same time. Wheel Spec Compressor Wheel : 52.5 / 68mm (GTX 11+0 Blade 20G Billet Wheel w/ Extended Tip) Turbine Wheel : 49.2 / 56 mm (12 Blade TD05H Turbine Wheel) Turbine Housing Compressor Housing : 3” inlet / 2” outlet  A/R .60 Turbine Housing : 7cm (A/R .49) Actuator  0.8bar spring is pre-installed on the adjustable actuator Additional 1.2bar and 1.5bar spring go with box. Bearing system  Journal Bearing Performance Thrust Bearing Kit Included. Cooling System  Oil and Water-cooled system Kit Includes 1 x Oil Feed Line Kit 1 x Oil Return Pipe Kit 2 x Water Line Kit 1 x Turbine Inlet Gasket 1 x Turbine Outlet Gasket   Everything shown on picture included Made By  MAMBATEK Warranty  One year IMPORTANT NOTES FOR BUYERS:PLEASE CONTACT US FOR STOCK AVAILABILITY AND ETA BEFORE PLACING AN ORDER FOR THIS ITEM. A 10% HANDLING FEE WILL BE CHARGED FOR REFUND OF PAYMENT MADE BY AFTERPAY IF WE ARE NOT CONTACTED BEFOREHAND.EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA / SOME OTHER COUNTRY AREASWE WILL CONTACT BUYER IF THERE IS ANY EXTRA SHIPPING CHARGE!

MAMBA 12-11 GTX BilletTurbo FIT TOYOTA 7MGTE Supra Soarer 3" TD05H-20G w/7cm Hsg

Code: 001-1315
$1,317.69
In Stock

Product Information

P/N.

 001-1315

Item Name

MAMBA 12-11 GTX Billet Turbocharger TOYOTA 7M-GTE 3" Anti Surge TD05H-20G with 7cm Turbine Housing

Situation

 Brand New In Box
 Complete CHRA balanced by SCHENCK MBRS110 Germany

Application

TOYOTA 7M-GTE

Bolt Up to fit factory exhaust manifold and dump pipe.

Cover inlet pipe / Air filter needs to modify to fit this 3" inlet.

 

This MAMBA Special turbo goes with 7cm turbine housing will make it spool faster than factory 8cm CT26 Turbo. And larger billet wheel will supply enough airflow to support higher torque and top end HP at the same time.

Wheel Spec

Compressor Wheel : 52.5 / 68mm (GTX 11+0 Blade 20G Billet Wheel w/ Extended Tip)

Turbine Wheel : 49.2 / 56 mm (12 Blade TD05H Turbine Wheel)

Turbine Housing

Compressor Housing : 3” inlet / 2” outlet  A/R .60

Turbine Housing : 7cm (A/R .49)

Actuator

 0.8bar spring is pre-installed on the adjustable actuator
 Additional 1.2bar and 1.5bar spring go with box.

Bearing system

 Journal Bearing
 Performance Thrust Bearing Kit Included.

Cooling System

 Oil and Water-cooled system

Kit Includes

1 x Oil Feed Line Kit

1 x Oil Return Pipe Kit

2 x Water Line Kit

1 x Turbine Inlet Gasket

1 x Turbine Outlet Gasket

 

Everything shown on picture included

Made By

 MAMBATEK

Warranty

 One year


IMPORTANT NOTES FOR BUYERS:

PLEASE CONTACT US FOR STOCK AVAILABILITY AND ETA BEFORE PLACING AN ORDER FOR THIS ITEM. A 10% HANDLING FEE WILL BE CHARGED FOR REFUND OF PAYMENT MADE BY AFTERPAY IF WE ARE NOT CONTACTED BEFOREHAND.

EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM 
SA / NT / TAS / WA / SOME OTHER COUNTRY AREAS
WE WILL CONTACT BUYER IF THERE IS ANY EXTRA SHIPPING CHARGE!

Product Information

P/N.

 001-1315

Item Name

MAMBA 12-11 GTX Billet Turbocharger TOYOTA 7M-GTE 3" Anti Surge TD05H-20G with 7cm Turbine Housing

Situation

 Brand New In Box
 Complete CHRA balanced by SCHENCK MBRS110 Germany

Application

TOYOTA 7M-GTE

Bolt Up to fit factory exhaust manifold and dump pipe.

Cover inlet pipe / Air filter needs to modify to fit this 3" inlet.

 

This MAMBA Special turbo goes with 7cm turbine housing will make it spool faster than factory 8cm CT26 Turbo. And larger billet wheel will supply enough airflow to support higher torque and top end HP at the same time.

Wheel Spec

Compressor Wheel : 52.5 / 68mm (GTX 11+0 Blade 20G Billet Wheel w/ Extended Tip)

Turbine Wheel : 49.2 / 56 mm (12 Blade TD05H Turbine Wheel)

Turbine Housing

Compressor Housing : 3” inlet / 2” outlet  A/R .60

Turbine Housing : 7cm (A/R .49)

Actuator

 0.8bar spring is pre-installed on the adjustable actuator
 Additional 1.2bar and 1.5bar spring go with box.

Bearing system

 Journal Bearing
 Performance Thrust Bearing Kit Included.

Cooling System

 Oil and Water-cooled system

Kit Includes

1 x Oil Feed Line Kit

1 x Oil Return Pipe Kit

2 x Water Line Kit

1 x Turbine Inlet Gasket

1 x Turbine Outlet Gasket

 

Everything shown on picture included

Made By

 MAMBATEK

Warranty

 One year


IMPORTANT NOTES FOR BUYERS:
PLEASE CONTACT US FOR STOCK AVAILABILITY AND ETA BEFORE PLACING AN ORDER FOR THIS ITEM. A 10% HANDLING FEE WILL BE CHARGED FOR REFUND OF PAYMENT MADE BY AFTERPAY IF WE ARE NOT CONTACTED BEFOREHAND.
EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA / SOME OTHER COUNTRY AREASWE WILL CONTACT BUYER IF THERE IS ANY EXTRA SHIPPING CHARGE!