Custom MAMBA Ball Bearing For Subaru Turbocharger 3" GTX2867R w/ .57 T3 TD42 Hsg Custom MAMBA Ball Bearing For Subaru Turbocharger 3" GTX2867R w/ .57 T3 TD42 Hsg Mamba Product Information P/N. 002-0335 Item Name MAMBA Custom Ball Bearing 3" GTX2867R Anti Surge SUBARU turbocharger with T3 .57 TD42 Turbine Housing Situation Brand New In Box Spec Compressor Wheel : 49.7 mm / 67.4 mm/Trim 55 (11+0 GTX Billet Wheel w/ Extended Tip) Turbine Wheel: 47 mm / 53.8 mm / Trim 76 Compressor Housing Inlet OD: 3" / 76.2mm Compressor Housing Outlet OD: 2" / 51.3 mm Compressor Housing A/R: .60 Turbine Housing A/R : .57 (8cm Housing) Turbine Flange: T3 Application This turbo is custom Subaru turbo for up-pipe with T3 flange. Support 380~430HP Bearing system NTN Ceramic Dual Ball Bearing Cooling System Oil and Water-Cooled Actuator    0.8bar spring pre-installed on the adjustable actuator. 1.2bar and 1.65bar spring will go with box. Stage 2 Viton Piston type of Adjustable actuator (Replace diaphragm type) Kit Includes 1 x 30cm Oil Feed Line Kit with 1mm Restrictor 2 x 25cm Water Feed / Return Line Kit 1 x Turbo Oil Return Pipe Kit 1 x Turbine Inlet Gasket 1 x Turbine Outlet Gasket 8 x 10mm Stud Kit with copper-coated nut 1 x VSR Balance Sheet 1 x Install Instruction Everything shown on picture is included Made By MAMBATEK Warranty One year IMPORTANT NOTES FOR BUYERS:PLEASE CONTACT US FOR STOCK AVAILABILITY AND ETA BEFORE PLACING AN ORDER FOR THIS ITEM. A 10% HANDLING FEE WILL BE CHARGED FOR REFUND OF PAYMENT MADE BY AFTERPAY IF WE ARE NOT CONTACTED BEFOREHAND.EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA / SOME OTHER COUNTRY AREASWE WILL CONTACT BUYER IF THERE IS ANY EXTRA SHIPPING CHARGE!

Custom MAMBA Ball Bearing For Subaru Turbocharger 3" GTX2867R w/ .57 T3 TD42 Hsg

Code: 002-0335
$1,538.90
In Stock

Product Information

P/N.

002-0335

Item Name

MAMBA Custom Ball Bearing 3" GTX2867R Anti Surge SUBARU turbocharger with T3 .57 TD42 Turbine Housing

Situation

Brand New In Box

Spec

Compressor Wheel : 49.7 mm / 67.4 mm/Trim 55 (11+0 GTX Billet Wheel w/ Extended Tip)


Turbine Wheel: 47 mm / 53.8 mm / Trim 76


Compressor Housing Inlet OD: 3" / 76.2mm


Compressor Housing Outlet OD: 2" / 51.3 mm


Compressor Housing A/R: .60


Turbine Housing A/R : .57 (8cm Housing)


Turbine Flange: T3

Application

This turbo is custom Subaru turbo for up-pipe with T3 flange.


Support 380~430HP

Bearing system

NTN Ceramic Dual Ball Bearing

Cooling System

Oil and Water-Cooled

Actuator

  

0.8bar spring pre-installed on the adjustable actuator.


1.2bar and 1.65bar spring will go with box.


Stage 2 Viton Piston type of Adjustable actuator (Replace diaphragm type)


Kit Includes

1 x 30cm Oil Feed Line Kit with 1mm Restrictor


2 x 25cm Water Feed / Return Line Kit


1 x Turbo Oil Return Pipe Kit


1 x Turbine Inlet Gasket


1 x Turbine Outlet Gasket


8 x 10mm Stud Kit with copper-coated nut


1 x VSR Balance Sheet


1 x Install Instruction


Everything shown on picture is included

Made By

MAMBATEK

Warranty

One year


IMPORTANT NOTES FOR BUYERS:

PLEASE CONTACT US FOR STOCK AVAILABILITY AND ETA BEFORE PLACING AN ORDER FOR THIS ITEM. A 10% HANDLING FEE WILL BE CHARGED FOR REFUND OF PAYMENT MADE BY AFTERPAY IF WE ARE NOT CONTACTED BEFOREHAND.

EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM 
SA / NT / TAS / WA / SOME OTHER COUNTRY AREAS
WE WILL CONTACT BUYER IF THERE IS ANY EXTRA SHIPPING CHARGE!

Product Information

P/N.

002-0335

Item Name

MAMBA Custom Ball Bearing 3" GTX2867R Anti Surge SUBARU turbocharger with T3 .57 TD42 Turbine Housing

Situation

Brand New In Box

Spec

Compressor Wheel : 49.7 mm / 67.4 mm/Trim 55 (11+0 GTX Billet Wheel w/ Extended Tip)


Turbine Wheel: 47 mm / 53.8 mm / Trim 76


Compressor Housing Inlet OD: 3" / 76.2mm


Compressor Housing Outlet OD: 2" / 51.3 mm


Compressor Housing A/R: .60


Turbine Housing A/R : .57 (8cm Housing)


Turbine Flange: T3

Application

This turbo is custom Subaru turbo for up-pipe with T3 flange.


Support 380~430HP

Bearing system

NTN Ceramic Dual Ball Bearing

Cooling System

Oil and Water-Cooled

Actuator

  

0.8bar spring pre-installed on the adjustable actuator.


1.2bar and 1.65bar spring will go with box.


Stage 2 Viton Piston type of Adjustable actuator (Replace diaphragm type)


Kit Includes

1 x 30cm Oil Feed Line Kit with 1mm Restrictor


2 x 25cm Water Feed / Return Line Kit


1 x Turbo Oil Return Pipe Kit


1 x Turbine Inlet Gasket


1 x Turbine Outlet Gasket


8 x 10mm Stud Kit with copper-coated nut


1 x VSR Balance Sheet


1 x Install Instruction


Everything shown on picture is included

Made By

MAMBATEK

Warranty

One year


IMPORTANT NOTES FOR BUYERS:
PLEASE CONTACT US FOR STOCK AVAILABILITY AND ETA BEFORE PLACING AN ORDER FOR THIS ITEM. A 10% HANDLING FEE WILL BE CHARGED FOR REFUND OF PAYMENT MADE BY AFTERPAY IF WE ARE NOT CONTACTED BEFOREHAND.
EXTRA SHIPPING CHARGE MAY APPLY IF BUYERS FROM SA / NT / TAS / WA / SOME OTHER COUNTRY AREASWE WILL CONTACT BUYER IF THERE IS ANY EXTRA SHIPPING CHARGE!